Welch Allyn Atlas Operator's Manual

52
6.4 Connecting the Temperature Probe (Models 622xx & 623xx)
The Temperature measurement comes from a skin probe.
Atlas Monitor models 622xx and 623xx can
measure skin temperature with the supplied
surface probe. Follow the package instructions for
probe placement.
Fahrenheit or Celsius - Temperature is displayed
in °F or °C. The current setting is indicated next to
the temperature measurement.
You can change the Temperature units in
Advanced Configuration:
• Press the
Date/Time button.
• Press
Trend.
• Use either
Select button to select
Temperature units.
• Use either
Set button to change between °F
and °C.
• Press
Trend to exit Advanced Configuration.
No alarm - The temperature display is an
indicator only; there is no alarm for temperature.
If the monitor is unable to read a temperature
properly, dashes will appear in place of the
temperature measurement.
Note: The temperature display is blank at power-
up and will remain blank until a temperature
probe is detected.

Welch Allyn Atlas Specifications

General

Brand	Welch Allyn
Model	Atlas
Category	Medical Equipment
Language	English