Need help?Do you have a question about the Welch Allyn CSM 7100 and is the answer not in the manual?
General| Category | Medical Equipment |
|---|---|
| Manufacturer | Welch Allyn |
| Product | CSM 7100 |
| Type | Vital Signs Monitor |
| SpO2 | Yes |
| NIBP | Yes |
| Temperature | Yes |
| Treadmill Control | No |
| Display | Color LCD |
| Data Storage | Internal Memory |
| Connectivity | USB |
| Power Source | AC Power |
| Dimensions (W x D x H) | 30 cm x 25 cm x 10 cm |
Overview of the training program's content and objectives.
Details on different Connex Spot Monitor models and their features.
Key features and capabilities of the Connex Spot Monitor (CSM).
Comparison of CSM models based on connectivity and parameter options.
Guide to configuring model numbers based on selected options.
Information on mains and battery power sources for the device.
Available communication interfaces including USB, Ethernet, WiFi, and Bluetooth.
Identification and explanation of physical controls and connection ports on the CSM.
Details on indicators and connection points for the Accessory Power Management (APM).
Procedures for initial device startup and POST process.
Explanation of the CSM's home screen layout and navigation elements.
How to interpret the battery charge level and remaining usage time.
Overview of different user screens like Patient, Alarms, and Review.
Explanation of physiological and technical alarms and their priority levels.
Setting measurement intervals and selecting user profiles for device operation.
Adjusting display brightness, power, and display lock settings.
Information on firmware, config files, hardware, and connectivity status.
Configuration of language, date, and time formats.
Settings for NIBP, Temperature, Averaging, and Programs.
Configuration of radio, security, server, and Bluetooth settings.
Access to stats, device info, config files, logs, and firmware upgrades.
Guidelines for periodic maintenance and component service schedules.
Diagnosing issues based on unexpected behavior and referring to solution tables.
Understanding and tracing technical alarms using the service manual.
Procedures for saving, locating, and opening log files for analysis.
Understanding the format of log messages for effective analysis.
How to determine facility and severity numbers from log file priority codes.
Interpreting message headers and actual error messages for issue resolution.
Overview of service needs, including part replacement and functional verification.
Information on replacing individual parts and using service kits.
Essential safety measures and tools required before disassembling the device.
Identification of the different cable connector types used in the CSM.
Step-by-step guide for disassembling various parts of the CSM.
Guidelines for correctly reassembling the device after servicing.
Table specifying torque values for screws during reassembly.
Introduction to the Welch Allyn Service Tool and its compatibility.
Details on using WAST for device info, updates, logs, and checks.
Essential steps using WAST after main PCBA replacement.
How to program serial numbers and model numbers using WAST.
Procedure for updating the device's firmware via WAST.
Steps for initializing and calibrating the NIBP module using WAST.
Performing basic and complete functional verification tests using WAST.
Introduction to the online tool for creating and deploying device configurations.
Steps for logging in, creating, and managing configurations online.
To Next Page