Weldclass Promax 180 User Manual

Weldclass Promax 180

12 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

Promax 180

Promax 200

Promax 350

Promax 500

OPERATING MANUAL FOR

ELECTRONIC WELDING HELMETS

Table of Contents

Questions and Answers:

M
Mary NewmanAug 11, 2025
What to do if my Weldclass Motorcycle Accessories filter lens does not darken?
- A
  Alyssa MurrayAug 12, 2025
  If your Weldclass Motorcycle Accessories filter lens isn't darkening, there are several possible reasons: * The Weld/Grind switch might be set to ‘Grind’. Switch it to ‘Weld’. * The batteries may be discharged. Replace them. * The batteries might not be correctly fitted. Check their installation (see section 4). * The battery or terminals could be dirty. Inspect and clean them.
J
Jennifer MarshAug 19, 2025
Why does my Weldclass Promax 180 filter lens flicker?
- C
  christina84Aug 19, 2025
  If your Weldclass Motorcycle Accessories filter lens flickers or intermittently fails to darken, consider these potential causes: * The front cover lens may be dirty or scratched, obstructing the sensors. Replace the cover lens. * The sensors could be dirty. Clean them with a soft cloth. * The sensitivity might be too low. Increase the sensitivity level. * There might be momentary disruptions to sensing the arc. Increase the delay time adjustment to compensate.

Weldclass Promax 180 Specifications

General

Brand	Weldclass
Model	Promax 180
Category	Motorcycle Accessories
Language	English