Weldclass Promax 180 - Specifications

2 / SPECIFICATIONS
Promax 180/200 Promax 350 Promax 500
Suitable Welding Processes MIG & MMA (stick) MIG, MMA (stick) & TIG
TIG Suitability n/a 30 amps or more 5 amps or more
Suitable Applications
Occasional
welding
Light industrial &
maintenance, Rural, etc
Professional
Optical Class 1/1/1/2
Switching Speed
Conforms to & exceeds the requirements of
AS/NZS1338.1 & EN379 Standards.
Sensors 2 4 4
Power Supply Solar powered.
1 x CR2032 replaceable
batteries (assisted by
Solar panel)
1 x CR2450 replaceable
batteries (assisted by
Solar panel)
On / O Ready to weld at any time – no switching required
Low Battery Indicator Led light
Inactive Shade Level (Grind/O) 4 4 4
Active Shade Level (Weld) 9-13 9-13 5-8 / 9-13
Sensitivity Adjustment Low – High
Delay Adjustment Min 0.1 sec – Max 1.0 sec
Grinding Mode Switch On/O (excludes Promax 180)
Operating Temperature -5
o
c to +55
o
c
Storage Temperature -25
o
c to +65
o
c
Weight 460 g 480 g 560 g
Viewing Area 96x39 mm 100x53 mm 98x87 mm
Outer Cover Lens Dimensions 115x104 mm 115x104 mm 137x117 mm
Inner Cover Lens Dimensions 102x43 mm 116x59 mm 115x92 mm
ADF/Cassette Dimensions 110 x 90 x 10mm 110 x 90 x 10mm 133 x 114 x 10mm
Magnication Lens Holder Internal – takes standard 108x51mm magnications lenses
Standards Compliance - Shell EN 175
AS/NZS1337.1 High Impact
EN 175 B, ANSI Z87.1, CSA Z94.3
Standards Compliance – Auto
Darkening Filter/Lens
EN 379 AS 1338.1, EN 379, ANSI Z87.1, CSA Z94.3