WDRV-5063M/7063M
Troubleshooting. 15
Operation Error
Q: Motorized camera does not operate.
A: Check if motorized camera is connected with REAR.
Check if source switches are in REAR mode.
Q: Auto scan does not operate.
A: Scan does not operate when there is only one camera image.
Q: Auto scan mode is too fast.
A: Adjust S.TIME in appropriate level in menu mode.
Q: OSD disappears in the screen.
A: Set OSD
[
OFF
]
to
[
ON
]
in menu mode.
Q: The screen does not change when entering trigger.
A: Set INPUT
[
Auto
]
in menu mode.
Q: The screen blinks when entering trigger.
A: Increase TRIGGER TIME in menu mode.
To Next Page
Loading...