Weldex WDRV-5063M - 3 Packing List; Installation.

WDRV-5063M/7063M
Installation
Packing List / Installation. 7
●
Install the monitor on a surface which can width stand more weight than 5Kg (11 lbs)
- Clean the surface before installation
- Remove the protective paper covering the bottom of the bracket
- Stick the provided bracket on the surface and fix it firmly with the screws.
- Adjust the angle of the monitor and fasten the handle screws tightly.
Mounting onto ceiling
Mounting on the floor, console, etc.
Packing List
2 Batteries (Type AAA)
for Remote Controller
(Option)
Remote Controller
(Option)
Set
[
TFT-LCD Monitor
]
Easy Release Bracket
(Option)
Sunshield
Power and Video
Input Cable
Stand Bracket
(
for WDRV Series
)
Manual
Stand Bracket
(
for WDL Series
)