21
Disposal
Do not dispose of electric tools together with
household waste material! In observance of Eu-
ropean Directive 2012/19/EU on waste electrical
and electronic equipment and its implementation
in accordance with national law, electric tools that
have reached the end of their life must be collec-
tedseparatelyandreturnedtoanenvironmentally
compatiblerecyclingfacility.
Original declaration of conformity
Soldering station WT-2M
We hereby declare that the products described herein
comply with the following guidelines:
2014/35/EU, 2014/30/EU, 2011/65/EU (RoHS)
Applied harmonised standards:
DIN EN 60335-1: 2012-10
DIN EN 60335-2-45: 2012-08
DIN EN 62233: 2008-11 / 2009-04
DIN EN 55014-1: 2012-05
DIN EN 55014-2: 2009-06
DIN EN 61000-3-2: 2015-03
DIN EN 61000-3-3: 2014-03
DIN EN 50581:2013-02
Besigheim, 2018-02-14
T. Fischer B. Frühwald
GlobalQualityManager GeneralManager
Authorised to compile technical documentation.
Weller Tools GmbH
Carl-Benz-Straße2,74354Besigheim,Germany
Technical Data
Soldering station WT 2M
Dimensions L x W x H (mm)
(Inch)
150 x 130 x 101
5.91 x 5.12 x 3.98
Fuse 230 V (A)
120 V (A)
100 V (A)
T0,8
T1,6
T2,0
Weight (kg) 2,92 kg
Mainssupplyvoltage ( V / Hz) 230 /50; 120 /60;
100 /50 /60
Power consumption (W) 150
Safetyclass I, antistatic housing
III, Soldering tool
Temperature range
Tool dependent
(°C)
(°F)
50 - 450 / 550
150-850 / 950
Temperatureaccuracy (°C/°F) ± 9 / ± 17
Temperaturestability (°C/°F) ± 2 / ± 4
Overload cut-out (150 W)
To avoid overloading a WT 2M station the power is limited to
150 W (see matrix 10). With a required tool performance of
both channels of more than 150 watts, a channel is automati-
callydeactivated(Auto-Off).
Symbols
Caution!
Warning! Risk of burns!
Read the operating instructions!
Beforeperformingworkofanykindontheunit,al-
waysdisconnectthepowerplugfromthesocket.
ESD-compatible design and ESD-compatible
workstation
Equipotential bonding
CEmarkofconformity
Fuse
Safetytransformer
EN
ENGLISH