GB
ENGLISH
Contaminated lters must be treated as special waste.
Dispose of replaced equipment parts, lters or old devices
in accordance with the rules and regulations applicable in
your country. Wear suitable protective gear.
Warning!
Working without a lter can result in irreparable damage to the
vacuum unit.
• Checkbeforestartingsolderingwhetheramainlteris
inserted.
Repairs must always be referred to a Weller-trained
specialist.
Use original replacement parts only.
Symbols
Caution!
Warning! Risk of burns!
Read the operating instructions!
Before performing work of any kind on the unit, al-
ways disconnect the power plug from the socket.
ESD-compatible design and ESD-compatible
workstation
Equipotential bonding
Soldering
Desoldering
Hot air
CE mark of conformity
Fuse
Safety transformer
Disposal
Do not dispose of electric tools together with
household waste material! In observance of Eu-
ropean Directive 2012/19/EU on waste electrical
and electronic equipment and its implementation
in accordance with national law, electric tools that
have reached the end of their life must be collec-
ted separately and returned to an environmentally
compatible recycling facility.
To Next Page
