Need help?Do you have a question about the Wellis Danube W-Flow and is the answer not in the manual?
General| Heater Power | 3 kW |
|---|---|
| SmartPhone app – WiFi connection | Yes |
| Thermo cover | Yes |
| Digital Control Panel | Yes |
| Power Consumption | 6.5 kW |
| Lying places | 2 |
| Filter system | 2 × Paper filter |
| Water sanitization | Ozone system |
| Headrests | 3 |
| Bluetooth Speaker | Yes |
| Heating System | Electric heater |
Safety warning about electrical hazards near hot tubs.
Safety warning regarding supervision of children in hot tubs.
Safety warning about hot tub temperatures and health conditions.
Specific safety advice for pregnant individuals using hot tubs.
Guidance on choosing and preparing a site for hot tub installation.
Specific requirements for installing a hot tub indoors.
Instructions for installing a hot tub outdoors on a patio.
Guidelines for installing a hot tub partially or fully below ground level.
Information on identifying and resolving error messages.
How to change the regulation mode of the heat pump.
Connecting the in.touch module to a WiFi network.
Changing low-level configuration, phases, and current.
Details on various heat pump modes like Eco Heat, Smart Heat, Cool.
Accessing hot tub training drills and adjusting parameters.
Details on the Endurance training drill for constant intensity.
Details on the Lap training drill with high and low intensity intervals.
Details on the Transition training drill with random intensity steps.
Details on the Cardio training drill with high and low intensity steps.
Details on the Power training drill with progressive intensity.
Creating and editing custom workout drills.
Connecting the hot tub to a WiFi network.
Controlling the Aquasoul Pro audio station.
Using the in.clear system for water sanitization.
Monitoring and adjusting the sodium bromide level in the water.
Setting the maintenance level for bromine generation.
Changing low-level configuration, phases, and current.
Setting the boost level based on the number of bathers.
Controlling in.mix features like zone selection, colors, and intensity.
Connecting a Bluetooth device to the Aquasoul Pro system.
How to connect speakers and a subwoofer to the audio system.
Steps to pair a Bluetooth device with the Aquasoul Pro.
Instructions for cleaning the in.clear cell using an acidic solution.
How to add sodium bromide for the in.clear system.
Using the Smart Touch interface for sanitization mode.
Step-by-step guide to setting the maintenance level.
Troubleshooting a no-flow condition in the in.clear unit.
Troubleshooting a no-flow condition in the in.clear unit.
Determining the proper maintenance level for the hot tub.
What to do when the sodium bromide level is too low.
Troubleshooting lost communication errors with linked systems.
Troubleshooting low BromiCharge levels and errors.
How to activate and set the boost level based on bather load.
Troubleshooting high sodium bromide or TDS levels.
Addressing issues with low or no bromine readings.
Process for pairing the hot tub and home transmitters.
Selecting zones, colors, and intensity for the hot tub lights.
Diagnosing problems with the in.touch 2 modules using status LEDs.
General electrical wiring instructions for all models.
Connecting accessories to Y Series hot tub packs.
Connecting accessories to the North American IN.YT model.
How to set up the GFCI/RCD rating for safe operation.
Answers to common questions about the in.clear system's performance.
To Next Page
