2 Do you need help? Visit our website: www.wellis.com
@. - 2021
..., ,
,
,
( ).
Simply drop W.I.S. in the spa and check the water quality via your smartphone. W.I.S.’s multiple sensors
keep an eye on the spa, evaluating visible elements (e.g. algae, limescale) and invisible ones (e.g. bac-
teria, aggressive water). W.I.S. formulates recommendations to optimise the use of chemicals (e.g. type,
dosage). Maintaining the water chemistry balance of the water helps to save in chemicals and to protect
your spa surface and equipment.
As soon as you switch on W.I.S., it performs the measurements:
1. every 10 minutes in the first hour;
2. these measurement results are then transmitted through a wireless connection to the server, which
analyzes them.
After the first hour, W.I.S. changes to standard hourly measurement cycles.
Performs measurements every
hour
Analyses the data
every 4 hours
Sends notifications
...
W.I.S. performs a complete set of measurements:
Temperature / pH / ORP / Conductivity / Battery charge level / Wi-Fi level (or Sigfox)
To Next Page
Loading...