Wellis WIS - Closing the W.I.S. Device; Placing W.I.S. in Water

8 Do you need help? Visit our website: www.wellis.com
@.   - 2021
 
  ... 
  ...   
turn the bottom cover to the left to remove the protective caps of the sensors. Remove the sensor caps
and store them in the original packaging; they will be useful when W.I.S. is winterized.
Screw the bottom cover back on before placing W.I.S. in the water.
Make sure that the top lid is
tightly in place before placing
the device back into the water to
ensure that W.I.S. is watertight.
When placing the top lid on
W.I.S., align the notches with the
pins.