Wellness Supply Rx STEP - Page 11

11 of 20 Wellness Supply Group V002
Step 5
1. Stabilize the Change Pipe (3) under the Main Frame (1) using the Hexagonal Screw (78).!
Step 6
1. Insert the Moving Handle Set (L) (105) and the Moving Handle Set (R) (106) to the Moving
Handle Set Post (L) (4) and the Moving Handle Set Post (R) (5). The angle and the length
can be adjusted by losing the Rotary Hand (118).
2. Attach the Wheel Chair Holder (151) to the Pipe (3) using Washer (149) and Screw (148).
Your new Recumbent Stepper is now ready to use.