GENERAL
OPERATION
PROGRAMMING
MAINTENANCE
SERVICE
AGENCY LISTING INFORMATION 1
WARRANTY 2
PRECAUTIONS & GENERAL INFORMATION 3
SPECIFICATIONS 4
INSTALLATION 5
FEATURES & OPERATING CONTROLS
OVEN FEATURES 8
SMART CONTROLLER 10
OPERATION
QUICK-GLANCE OPERATING GUIDE 12
DAILY SET-UP 13
COOK CYCLE OPERATION 14
PROGRAMMING
IMPORTANT:
Programming to be performed by Qualified Personnel ONLY!
ENTER PROGRAMMING MODE 15
CHANGE PROGRAMMED SETTINGS 16
ENABLING SCRATCH BISCUIT BUTTON (#6) 18
INSTRUCTIONS TO CHANGE COOKIE SETTINGS 19
INSTALL OPERATING SYSTEMS SOFTWARE 20
TRANSFER MENUS FROM CARD TO OVEN 21
TRANSFER MENUS FROM OVEN TO CARD 21
DEFAULT SETTINGS 22
CLEANING INSTRUCTIONS 23
TROUBLESHOOTING SUGGESTIONS 25
PREVENTATIVE MAINTENANCE 26
TEMPERATURE CALIBRATION 27
HINGE ADJUSTMENT
EXPLODED VIEW and PARTS LIST 28
WIRING DIAGRAM 32
PARTS & SERVICE 33
CUSTOMER SERVICE DATA FORM 33
TABLE OF CONTENTS
1
AGENCY LISTING INFORMATION
This appliance conforms to NSF Standard 4 for sanitation only if
installed in accordance with the supplied Installation Instructions and
maintained according to the instructions in this manual.
This appliance is and Listed under UL File E6070
for 208V and 240V.
STD 4
E6070
E6070
To Next Page
Loading...