Safety Precautions02
04
Do not use damaged power cords or compromised wall outlets.
There is a danger of an electric shock or fire.
Make sure the power cord is placed in a safe position where it will not be ob-
structed.
Unstable connection may cause fire.
Do not tug at the power cord to disconnect from the wall outlet. Hold the plug
to pull it out when needed.
Damage to the power cord can cause an electric shock.
Do not overload the outlet or circuit in which the system is plugged into.
It may cause a fire due to overheating at the outlet.
Do not touch the power plug with wet hands.
There is a danger of an electric shock.
Do not bend the power cord excessively or put heavy objects on the power
cord.
There is a danger of an electric shock or fire.
Unplug before cleaning inside of the unit, and do not use water directly on the
unit.
There is a danger of an electric shock.
Do not install the unit in or around damp areas, at a place near flammable
materials, or at a place exposed to rain or snow.
Do not put candles, lit cigarettes, etc. on the unit and do not install the unit
near a heating appliance.
There is a danger of a fire.
Do not put any covering on the rear or side of the unit.
Blocking the condenser may result in overheating and cause system
malfunction or system breakdown.
Do not let children hang on or climb the unit. There is a danger of fall.
Do not put a bowl containing water, chemicals, small metals, etc. on the unit.
If these materials fall into the unit, this may cause an electric shock or fire.
To Next Page
Loading...
