To Next PageTo Next PageWhat to do if Wen 10165 shows Err 16?
If your Wen Analytical Instruments displays Err 16, it means the received signal is too weak or the ambient light is too bright. To fix this, try aiming at a lighter-colored target surface, avoiding black surfaces, and holding the laser measure more steadily. Alternatively, use the measuring device at a dimmer time of day.
Why does my Wen Analytical Instruments show Err 15?
If your Wen Analytical Instruments shows Err 15, it indicates that the measuring point is out of range. To resolve this, choose a measuring point within the appropriate range.
What to do if Wen 10165 Analytical Instruments displays Err 26?
If your Wen Analytical Instruments displays Err 26, it means the area or volume result is too large to be displayed on the screen. You can measure a smaller area, or record the measurements of length, height, and width to calculate the area or volume on your own.
What to do if Wen Analytical Instruments shows Err 18?
If your Wen Analytical Instruments displays Err 18, it indicates that the background is too bright. Aim at a darker-colored target surface, avoiding glass or reflective surfaces, to resolve this issue.
How to fix Err 10 on Wen 10165?
If your Wen Analytical Instruments displays Err 10, it means that the battery is too low. Replace the batteries to resolve this issue.
General| Brand | Wen |
|---|---|
| Model | 10165 |
| Category | Analytical Instruments |
| Language | English |
Defines the intended use of the laser distance measure for measuring distances and volumes.
Warns against directing the laser beam into eyes, which can cause permanent damage.
Warns against opening the device, particularly the laser module, to avoid exposure.
Stipulates that modifications are prohibited and repairs must be done by qualified specialists.
Prohibits pointing the laser beam into the sky or at aircraft.
Provides step-by-step instructions for battery installation and removal, including type recommendations.
Explains how to choose between measuring from the base or the top of the unit.
Step-by-step guide for performing distance, length, height, and clearance measurements.
Instructions for calculating the area of a rectangular space using the device.
Guide on how to measure the volume of a rectangular prismatic space.
Lists common error codes and their corresponding causes and solutions.
