10
ELECTRICAL INFORMATION
GROUNDING INSTRUCTIONS (For charger)
IN THE EVENT OF A MALFUNCTION OR BREAKDOWN, grounding provides the path of least resistance
for an electric current and reduces the risk of electric shock. This tool is equipped with an electric cord that has an
equipment grounding conductor and a grounding plug. The plug MUST be plugged into a matching outlet that is
properly installed and grounded in accordance with ALL local codes and ordinances.
DO NOT MODIFY THE PLUG PROVIDED. If it will not fit the outlet, have the proper outlet installed by a
licensed electrician.
IMPROPER CONNECTION of the equipment grounding conductor can result in electric shock. The conduc-
tor with the green insulation (with or without yellow stripes) is the equipment grounding conductor. If repair or
replacement of the electric cord or plug is necessary, DO NOT connect the equipment grounding conductor to a
live terminal.
CHECK with a licensed electrician or service personnel if you do not completely understand the grounding instruc-
tions or whether the tool is properly grounded.
CAUTION: In all cases, make certain the outlet in question is properly grounded. If you are not sure, have a li-
censed electrician check the outlet.
WARNING: This charger is for indoor use only. Do not expose to rain or use in damp locations.
CHARGER
Protect the battery charger and its cord from damage. Keep the charger and its cord away from heat, oil and sharp
edges. Electrical plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs
with grounded appliances. Unmodified plugs and matching outlets will reduce the risk of electric shock.
Keep the battery charger, battery pack(s) and the cordless tool out of the reach of children. Do not use the sup-
plied battery charger to charge other cordless tools. During periods of heavy use, the battery pack will become
warm. Allow the battery pack to cool to room temperature before inserting it into the charger to recharge.
Do not overcharge batteries. Do not exceed the maximum charging times. These charging times only apply to dis-
charged batteries. Frequent insertion of a charged or partially charged battery pack will result in overcharging and
cell damage. Do not leave battery in the charger for days on end. Never use or charge a battery if you suspect that
it has been more than 12 months since the last time they were charged. There is a high probability that the battery
pack has already suffered dangerous damage (exhaustive discharge). Do not use battery that have been exposed to
heat during the charging process, as the battery cells may have suffered dangerous damage. Do not use battery that
have suffered curvature or deformation during the charging process or those that exhibit other atypical symptoms
(gassing, hissing, cracking, etc.)
Warning: Waste electrical products should not be disposed of with household waste. Please recycle
where facilities exist. Check with your local authority or retailer for recycling advice.
BATTERY & CHARGER INSTRUCTIONS
To Next Page
Loading...
Need help?
General
