16. MAINTAIN TOOLS PROPERLY. ALWAYS keep tools clean and in good working order. Follow instruc-
tions for lubricating and changing accessories.
17. CHECK FOR DAMAGED PARTS. Check for alignment of moving parts, jamming, breakage, improper
mounting, or any other conditions that may affect the tool’s operation. Any part that is damaged should be properly
repaired or replaced before use.
19. DO NOT operate the tool if you are under the influence of drugs, alcohol, or medication that may affect your
ability to properly use the tool.
20. USE SAFETY GOGGLES AT ALL TIMES that comply with ANSI Z87.1. Normal safety glasses only have
impact resistant lenses and are not designed for safety. Wear a face or dust mask when working in a dusty environ-
ment. Use ear protection such as plugs or muffs during extended periods of operation.
GENERAL SAFETY RULES
4
1. Keep all parts of the body away from the saw chain when the chainsaw is operating. Before you start the chainsaw,
make sure the saw chain is not contacting anything.
2. Always hold the chainsaw with your right hand on the rear handle and your left hand on the front handle. Holding
the chainsaw in the opposite manner can result in an increased risk of serious injury to the user.
3. Only hold the power tool by the insulated gripping surfaces to avoid electric shock in case the saw chain contacts
hidden wiring. Saw chains contacting a live wire may make exposed metal parts of the power tool live and can give
the operator an electric shock.
4. Keep the saw chain away from any cords or extension cables.
5. Wear safety glasses and hearing protection. Protective equipment for hands, legs, head and feet is also highly
recommended. Protective clothing greatly reduces the risk of personal injury from loose debris or accidental contact
with the saw chain.
6. Do not operate the chainsaw while standing in a tree. Only operate the chainsaw from a firm, level surface fixed
on the ground. Always keep proper footing during operation. Slippery or unstable surfaces such as ladders may
cause a loss of balance or control.
7. When cutting a limb that is under tension, be alert for spring back. When tension from wood fibers and branches
is suddenly released, the limb may fly in unpredictable ways, possibly resulting in kickback and injury to the user.
8. Use extreme caution when cutting brush and saplings. The slender material may catch the saw chain, whipping
towards you or pulling you off balance.
9. Carry the chainsaw by the front handle with the chainsaw switched off and away from your body. When transport-
ing or storing the chainsaw always protect the blade with a scabbard (blade cover). Remove battery for transport.
SPECIFIC RULES FOR CHAINSAWS
WARNING: Do not let comfort or familiarity with product (gained from repeated
use) replace strict adherence to product safety rules. If you use this tool incorrectly,
you can suffer serious personal injury!
To Next Page
Loading...
