EasyManuals Logo

Wen 40417 User Manual

Wen 40417
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #21 background imageLoading...
Page #21 background image
21
MAINTENANCE
CLEANING & STORAGE
1. Brush or blow dust and debris out of the air vents using compressed air or a vacuum. Keep the air
vents free of obstructions, sawdust, and wood chips. Do not spray, wash, or immerse the air vents in
water.
2. Wipe off the housing and the plastic components using a moist, soft cloth. Do not use strong
solvents or detergents on the plastic housing or plastic components. Certain household cleaners may
cause damage, and may cause a shock hazard.
3. Routinely clean out the dust and debris that gathers under the tension housing, the oil outlet, and
around the bar and the chain sprocket. Otherwise it can jam up the sprocket, the chain, and the
lubrication system.
CHARGING THE BATTERY
See instructions on page 14.
STORING THE BATTERY AND CHARGER
Make sure the battery is fully charged before storage in order to maximize the life of the battery.
Do not store the battery pack on the tool. Remove the battery from the tool before storage.
After charging, the battery pack may be stored in the charger, as long as the charger is not
plugged in.
Store the charger at normal room temperature. Do not store it in excessive heat. Do not use the
charger in direct sunlight or in damp conditions. Do not charge outside. Recharge at room tem-
perature.
Keep the charger clean and clear of debris. Do not allow foreign material to get into the recessed
cavity or onto the contacts. Wipe the charger clean with a dry cloth. Do not use solvents or water,
and do not place the charger in wet conditions.
Always unplug the charger when charging is complete. Never leave your charger plugged in if it is
not charging a battery.
WARNING: In order to avoid personal injury and the risk of fire and electric shock, remove
the battery pack before adjusting, inspecting, or cleaning the chainsaw.
WARNING: Any attempt to repair or replace electrical parts on this tool may be hazardous.
Servicing of the tool must be performed by a qualified technician. When servicing, use only identi-
cal WEN replacement parts. Use of other parts may be hazardous or induce product failure.
WARNING: Fully charge your battery every 3 months to preserve your battery’s life. Do not
let your battery get below 20% charge; this will cause your battery to prematurely fail. See Tables
A and B below to understand what the LED lights on your charger and battery indicate.

Other manuals for Wen 40417

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Wen 40417 and is the answer not in the manual?

Wen 40417 Specifications

General IconGeneral
BrandWen
Model40417
CategoryChainsaw
LanguageEnglish

Related product manuals