1010
ASSEMBLY
UNPACKING
This Log Splitter requires the wheel assembly to be attached to the base. See wheel assembly directions below.
NOTE: Do not discard box or any packing material until all parts are examined and accounted for.
This Log Splitter has been filled with AW32 oil during the manufacturing process. Refer to the photo below and
the parts list should it be necessary to disassemble the unit for repair or replacement of parts. Inspect the unit for
shipping damage.
IF ANY PART OF THE LOG SPLITTER IS MISSING OR DAMAGED, DO NOT PLUG IN UNTIL THE
DAMAGED PART IS REPAIRED OR REPLACED. PLEASE CALL 1-800-232-1195 FOR ASSISTANCE.
Item List:
1 Log Splitter
2 Wheels
1 Wheel Shaft
1 Cotter Pin
2 Washers and 2 Nuts