To Next Page
J
Joseph RobinsonAug 17, 2025
What to do if my Wen Grinder motor stalls and blows a fuse?
- SStephen ChandlerAug 17, 2025
If your WEN Grinder's motor stalls and causes a blown fuse or tripped circuit, here's what you should do: 1. Inspect the motor connections for any looseness, shorts, or worn insulation. If you find any issues, it's best to send it in for servicing. 2. Address any voltage supply problems, which could stem from the extension cord or the power source itself. 3. Make sure you're using the correct fuses or circuit breakers. Plug the grinder into a suitable circuit that matches the appropriate fuse/breaker. 4. Reduce the load on the motor.
General
