To Next PageTo Next PageWhy is my Wen 6301 Sander not sanding effectively?
If your Wen sander isn't sanding effectively, start by checking the sandpaper for any signs of wear or damage. Also, ensure you're using the correct grit of sandpaper for your project. Remember that fine sandpaper has large numbers (100 to 600), while coarse sandpaper has small numbers (36 to 80).
What to do if my Wen sander will not start?
If your Wen sander won't start, first ensure the power cord is properly plugged into the outlet. If it is plugged in, check the outlet for power by testing it with another device. If the outlet is unpowered, turn off the sander and check the circuit breaker. If these steps don't resolve the issue, the sander may have internal damage or wear, and you should have a technician service the tool.
What to do if my Wen 6301 is making excessive noise?
If your Wen sander is making excessive noise or rattling, it may have internal damage or wear. In this case, you should have a technician service the tool.
Safety precautions related to the physical workspace environment.
Safety guidelines concerning the tool's electrical components and usage.
Recommendations for user protection, including PPE and alertness.
Specific safety instructions for operating the palm sander.
General
