DUST COLLECTOR SAFETY WARNINGS
DUST COLLECTOR SAFETY
1. This dust collector is intended only for collecting
wood dust and chips from woodworking machines. Do
not use dust collector for anything except wood dust.
Material such as liquids, aerosols, metal dust, screws,
glass, plastic or rock can cause sparks when coming
into contact with any part of the collection system.
2. Never allow steel to come into contact with impeller.
Impact with any hard material may result in sparks which
may cause fire. Be mindful of any situation that results in
a risk of fire.
3. Dust created while using machinery may cause cancer,
birth defects, or long-term respiratory damage. Be aware
of dust hazards associated with each workpiece material
and always wear a NIOSH-approved respirator.
4. Do not place your hands, lumber or tools near the
inlet opening while machine is plugged in or during
operation. Keep animals and children away from open
dust collection inlets.
5. Regularly check and empty the collection bag to avoid
the buildup of fine dust that can increase the risk of fire.
Regularly clean the surrounding area of the machine.
Excessive dust buildup on heat sources such as overhead
lights and electrical panels will increase the risk of fire.
6. Always wear a respirator and safety glasses when
removing, emptying or replacing the collection bag.
Empty dust away from ignition sources and into a
suitable container.
WARNING! Do not let comfort or familiarity with the product replace strict adherence to product safety rules.
Failure to follow the safety instructions may result in serious personal injury.
These safety instructions can’t possibly warn of every scenario that may arise with this tool,
always make sure to stay alert and use common sense during operation.
6
To Next Page
Loading...
Need help?
General
