AUTO FUEL SELECTION
Your generator is equipped with Auto Fuel Selection Technology. What this means is that the generator will auto-
matically select the fuel source (LPG or gasoline) depending on availability. LPG is prioritized; this means that if a
propane tank with enough LPG is connected, the generator will automatically use LPG. If no propane tank is con-
nected, or if there is no LPG remaining in the tank, the generator will use gasoline (if there is gasoline in the fuel
tank). Refer to Table 1 below for information on how to set up your generator for a particular fuel.
GENERATOR PREPARATION
Propane tank valve 3-in-1 dial on generator
I want to use gasoline. Closed Run
I want to use LPG. Open Run* or Off
Table 1 – Auto Fuel Selection® chart.*It is ideal to run the generator on LPG with the fuel valve closed (OFF), but if
it stays open (RUN), the generator will still run properly.
NOTE: Make sure the generator can handle the load(s) you plan to connect. The generator can provide more power
when running on gasoline than on LPG. Consult the specifications table on p. 3, as well as page 23 (“Calculating the
Wattage of Your Device(s)”) to ensure that your load(s) will not exceed the rated wattage for a particular fuel. See
also "Switching Fuels" for more information.
17
To Next Page
Loading...
Need help?
General
