To Next Page
S
Sandra TuckerAug 13, 2025
What to do if my Wen DF450i runs, but does not support all electrical devices connected?
- DdustincastroAug 13, 2025
If your Wen Portable Generator runs but doesn't support all connected devices: * If AC or DC receptacles are overloaded and the circuit breaker has tripped, turn off and unplug all electrical devices. Wait 3 minutes, then press the breaker to reset. Check the amperage of the devices to ensure they are within the receptacles’ rated capacities. * Disconnect any faulty or short-circuited electrical devices. * Clean or replace the air filter element.
General
