Wesco WS8910 User Manual

26
EN
PROMPT MESSAGE
While using the device, the main displaying area may occur following messages:
Message
Reason Solution
b.L Too lower battery
voltage
To replace the new battery
t.L Too lower temperature To warn up the device
t.h Too higher temperature To cool the device
d.H Data overflow To measure again
S.L Too weaker signal
strength
To measure the target point with stronger
reflective ability or use the sighting board.
S.H Too stronger signal
strength
To measure the target point with weaker
reflective ability or use the sighting board
H.F Hardware error start/ shut down the device again, in case
of starting/ shutting down device failed to
solve such problem, please contact your local
dealer.

Wesco WS8910 Specifications

General

Brand	Wesco
Model	WS8910
Category	Measuring Instruments
Language	English