6
1.
Identify the Front Stabilizer (3). Make sure that
t
he Front Stabilizer is turned so that the
Wheels (32) are not touching the floor.
While another person lifts the front of the Frame
(1), attach the Front Stabilizer (3) to the Frame
with two M10 x 112mm Carriage Bolts (34) and
two M10 Locknuts (29).
3
29
29
32
32
34
1
1
2. While another person lifts the rear of the Frame
(1), attach the Rear Stabilizer (4) to the Frame
with two M10 x 112mm Carriage Bolts (34) and
two M10 Locknuts (29).
34
4
1
29
29
2
To make assembly easier, read the
i
nformation on page 5 before you begin.
To Next Page
Loading...
