A
Anthony ClarkJul 31, 2025
How to fix Weslo Cadence C 8 Treadmill when the power does not turn on?
- DDaniel FloresJul 31, 2025
To troubleshoot why the Weslo Treadmill power isn't turning on: * Ensure the power cord is plugged into a properly earthed outlet. If you need an extension cord, use only a 3-conductor, 1 mm[2] (14-gauge) cord no longer than 1.5 m (5 ft.). Note that the treadmill isn't compatible with GFCI-equipped outlets. * Make sure the key is inserted into the console after plugging in the power cord. * Check the circuit breaker near the power cord. If the switch protrudes, the breaker has tripped. Wait five minutes, then press the switch back in to reset it. * Verify the on/off switch near the power cord is in the "on" position.