G
gmorenoJul 31, 2025
How to turn on Weslo Treadmill?
- RRaymond MoralesJul 31, 2025
First, ensure the power cord is securely plugged into a properly earthed outlet. If you need an extension cord, use only a 3-conductor, 1 mm[2] (14-gauge) cord no longer than 1.5 m (5 ft.). Note that the Weslo Treadmill isn't compatible with GFCI-equipped outlets. Also, make sure the key is inserted into the console after plugging in the power cord. Check the circuit breaker located near the power cord; if the switch protrudes, the breaker has tripped. Wait five minutes, then press the switch to reset it. Finally, check that the on/off switch near the power cord is in the 'on' position.