Need help?Do you have a question about the WEST P8010 and is the answer not in the manual?
Setting up parameters for P6010, P8010 indicators.
Methods for manually tuning controller parameters based on output configuration.
Step-by-step guide to recalibrate the instrument's universal input.
General| Display | Dual 4-digit LED |
|---|---|
| Output | Relay |
| Control Mode | PID, On-Off |
| Communication | RS485 Modbus |
| Power Supply | 100-240 VAC, 50/60Hz |
| Dimensions | 48 x 48 mm |
| Operating Temperature | 0 to 50°C |
| Output Current | Relay: 2A, SSR: 20mA |
To Next Page
