Westerbeke 50 - Page 102

SERVICE BULLETIN
V.17
DATE:
January 22, 1980
BULLETIN NUMBER: 104
MODEL: Westerbeke 30 and 50
SUBJECT: Sea Water Pump Pulley Set Screw P.N. 11357
The sea water pump pulley on the Westerbeke 30 and 50 engines is keyed to the
sea water
pump shaft and locked in position with a heat treated 5/32" Allen head set
screw, Westerbeke P.N. 11357.
Particular attention should be paid to this set screw at the time of commission-
ing of the engine and during regular servicing of the engine. Ensure that it is tight.
If not, remove the set screw and apply a good locking liquid to the set screw threads
and reinstall and tighten with the aid of a 5/32" Allen wrench.
PULLEY
PIN:
24293
SEA WATER
PUMP
~S~.~ SCREW
__ ~N. 11357
J. H. WESTERBEKE CORP.
AVON INDUSTRIAL PARK, AVON, MASS. 02322· (S17) 588-7700
CABLE: WESTCORP, AVON· TELEX: 92- ••••