Need help?Do you have a question about the Westermo MRD-455 and is the answer not in the manual?
General| Brand | Westermo |
|---|---|
| Model | MRD-455 |
| Category | Network Router |
| Language | English |
Precautions and checks before operating the unit.
Guidelines for proper installation by qualified personnel.
Advice for maintaining operational status and warranty obligations.
Precautions specific to GSM operations and performance.
Guidelines for use in hospitals and with medical devices.
Safety warnings for use in aircraft and vehicles.
Safety warnings regarding vehicle airbags and blasting areas.
Precautions for explosive environments and RF energy interference.
Limitations for critical uses and importance of data backup.
Guidelines for antenna handling and unit maintenance.
Technical details of the MRD-315 interfaces and connectivity.
Technical details of the MRD-355 interfaces and connectivity.
Technical details of the MRD-455 interfaces and connectivity.
Details on main, optional, and GPS antennas, including connectors.
Information on SIM card electrical specifications and number of slots.
Pinout details for the MRD-315 Ethernet LAN ports.
Pinout details for the MRD-315 serial port.
Pinout details for the MRD-355/455 Ethernet LAN ports.
Pinout details for the MRD-355/455 serial port.
Description of the unit's status indicator light behavior.
Details on network connection indicators and signal strength.
Step-by-step guide to reset the unit to factory default settings.
Procedure for ejecting, inserting, and securing the SIM card.
Instructions for properly connecting the unit's antennas.
Guidance on connecting the correct DC power source.
Explanation of Ethernet port features and connectivity.
How to connect to and use the unit's web-based configuration interface.
Steps to configure Windows PC network settings for unit access.
Login procedure and overview of the unit's status summary page.
Steps to configure the unit's wireless interface settings.
Procedure for entering and saving the SIM card PIN.
Guide to adding a new network connection profile for providers.
How to monitor and verify the wireless connection status.
Procedure for changing the LAN port IP address and netmask.
Steps to enable and configure the DHCP server for automatic IP allocation.
Ensuring proper ground connection for correct unit function.
Requirements for mounting location to ensure adequate cooling.
To Next Page
