WD SERIAL ATA RAID CONTROLLER
INTRODUCTION/GETTING STARTED - 3
USER MANUAL
Compatibility
Kit Contents
! WD SATA RAID Controller
! SATA RAID Controller device drivers diskette
! SATA RAID Controller software utility CD
! Quick Install Guide
Operating Systems
The following operating systems are supported:
! Windows
®
2003 Server
! Windows XP
! Windows 2000
System Requirements
Pentium-class system with an available 32-bit PCI expansion slot (2.2- or 2.3-compliant) or
32-bit portion of a 64-bit PCI slot.
Features Benefits
Compliant with PCI v2.3 Local Bus standard Provides highest level of hardware compatibility.
Compliant with SATA Specification 1.0 Provides full compatibility with first generation SATA hard drives.
Compliant with PCI Bus Master standard. PCI
Bus Master support
Provides 32-bit I/O, Bus Master, and Ultra ATA performance for
optimal system performance.
Tested compatibility to coexist with
motherboards that have integrated IDE
controllers
Improves system performance of new and existing installations.
Features LBA and Extended Interrupt13 drive
translation in controller onboard BIOS
Breaks capacity barriers for support of drives greater than 137 GB
in capacity. Offers flexible storage options for space demanding
applications.
WARNING! Using an operating system not listed below could result in data loss.
To Next Page
Loading...