S
Susan JacobsSep 9, 2025
What to do if the bottom flighting will not turn on my Westfield 80-51?
- PPaul ByrdSep 9, 2025
If the bottom flighting won't turn, the center coupler bolt might be broken or missing. Replace the bolt.
To Next PageTo Next PageWhat to do if the bottom flighting will not turn on my Westfield 80-51?
If the bottom flighting won't turn, the center coupler bolt might be broken or missing. Replace the bolt.
How to fix a winch coupler that spins off (Dutton winch) on my Westfield 80-51 Farm Equipment?
If the winch coupler spins off, it could be due to worn internal winch parts, which would need to be replaced. Another potential cause is damage or an obstruction on the tracking; check the tracking for damage or obstructions.
Why is the auger flighting noisy on my Westfield Farm Equipment?
Noisy auger flighting can be caused by an obstruction in the auger tube. Identify and remove the obstruction. Alternatively, the flighting shaft bolts might be loose or damaged; tighten or replace the bolts.
General| Brand | Westfield |
|---|---|
| Model | 80-51 |
| Category | Farm Equipment |
| Language | English |
Explains the meaning of safety alert symbols and signal words used in the manual.
Outlines the fundamental safety duties and qualifications for auger operators.
Details safety measures for drives and the importance of lockout procedures.
Covers safety requirements for electric motors, including grounding and guards.
Warns about hazards associated with rotating parts like pulleys and chains.
Highlights the dangers of rotating flighting and necessary precautions.
Advises on maintaining safe distances from overhead power lines.
Shows the location and content of various safety decals on the equipment.
Emphasizes safety during the assembly process due to heavy components.
Covers procedures for adding or removing driveshaft segments.
Provides instructions for mounting the EMD gearbox assembly.
Outlines critical safety measures for transporting and positioning the auger.
Essential safety practices to follow during auger operation.
A checklist to ensure the auger is safe and ready for operation.
Safety guidelines to follow before and during maintenance.
Diagnosing and resolving issues related to noise and vibration.
