Why does my Westinghouse LCD TV remote control not work?
Ensure you are pressing only one button at a time. Check that the batteries are properly inserted and replace them with new ones if they are drained.
How to fix a Westinghouse LCD TV with no power?
First, ensure the power indicator is illuminated blue. Then, check that the power cord is securely connected to the AC-in jack and plugged into a working AC outlet. To verify the outlet is functional, try plugging in another electrical device.
What to do if there is no sound on my Westinghouse LCD TV?
First, verify the audio input cable is properly connected to the correct terminal and that the correct input mode is enabled. Check if the volume is muted by pressing the Vol+ key. You may also adjust the Bass, Treble, and Balance settings in the Audio menu. If using the TV speakers, ensure the TV Speakers option is set to On in the Audio menu. If you're using an external audio device, make sure the TV Speakers option is set to Off in the Audio menu.
What to do if there is no picture on my Westinghouse LCD TV?
Make sure the video input cable is properly connected to the correct terminal, and that the correct input mode is enabled. For example, if a VGA cable is connected to display a computer screen, the VGA input mode must be enabled. Verify that the antenna is properly connected and that the preferred channel is enabled in the channel list. You can access this by pressing and selecting Channels/Channel List. Also, adjust the display settings.
How to improve poor image quality on Westinghouse LCD TV?
Check your antenna connection, and if necessary, rotate the antenna and wait up to ten seconds for a signal. Reduce signal splitters and excessively long cables. Replace poor antenna cables and/or connectors to improve signal quality. Press to adjust the Aspect ratio. Adjust the Noise Reduction setting in Picture menu. If you are in HDMI mode, ensure the external device is compatible with the LED TV.
Why are the colors wrong on my Westinghouse LCD TV?
If any colors (red, green or blue) are missing, check the video cable to ensure it is securely connected. Loose or broken pins in the cable connector could cause an improper connection. Adjust the Hue, Saturation, and Color Temperature settings in the Picture menu. You can also connect the TV to another computer to check if the problem is with the computer screen.
Why does my Westinghouse LCD TV power suddenly turn off?
Make sure the sleep timer is turned off.
What to do if Westinghouse LCD TV shows no picture with VGA cable?
Make sure the VGA cable is properly connected to the LED TV’s VGA port. Decrease the video resolution setting on the computer and try again. Adjust the display settings.
How do I fix a cut off picture on my Westinghouse LCD TV?
Press to adjust the Aspect ratio.
General| Screen Size | 32 inches |
|---|---|
| Display Type | LED |
| Resolution | 1366 x 768 |
| HDMI Ports | 3 |
| USB Ports | 1 |
| Refresh Rate | 60 Hz |
| Smart TV | No |
| Aspect Ratio | 16:9 |
| Built-in Tuner | Yes |
To Next Page
