Command 30: Purchase obligation before return
By setting this command to 1 the customer is obliged to purchase
before receiving back the return - this avoids using the coin mech
as a coin changer.
Command 31: Setting Max card or cash credit accepted
The max credit accepted by the coin mech by either key/card or
cash is set - if this amount is exceeded - no more coins or notes
are accepted. Recommended value is £10.00.
Command 32: Minimum coin level in tubes
The minimum number of coins which must remain in each tube
for it to work. This is setting is fundamental for correct coin
management by the machine.
Command 33: Disabling single coins/banknotes
Command allows you to perform 2 adjustments:
1 - Block acceptance of particular coins by coin mech
2 - Block acceptance of particular banknotes by the reader
Command 34: Inhibits coin inhibition with exact amount
Command blocks the acceptance of certain coins when coin levels
are low - i.e when the display reads "Insert Exact Amount"
18. Setting Payment Systems
To Next Page
Loading...
