WFCO WF-5100 Series User Manual

11
5. Operation:
To operate the WF-5100 series Inverter, turn it on by using the ON/OFF
switch. The inverter is now ready to deliver AC power to your loads. If you
are loading several appliances, turn them on separately after the inverter
switch is on, this process is to avoid the power inverter from delivering the
starting current all at once to the loads.
5-1. Controls and indicators:
The ON/OFF switch turns on/off the control circuit of the power
inverter. The WF-5100 Inverter operates on
input voltage ranges as follows:
10 to 15.0 VDC for 12V models
20 to 30.0 VDC for 24V models
Yellow LED - indicates battery back up status.
Green LED - indicates AC input status.
Red LED - indicates inverter failure.
Note: Inverter will not operate on AC input only. A battery must be
connected to the inverter for inverter to operate.
LCD Display - indicates operation status.

WFCO WF-5100 Series Specifications

General

Brand	WFCO
Model	WF-5100 Series
Category	Inverter
Language	English