1. Important Safety Instructions
WARNING !
be sure to read these safety instructions.
1-1. General Safety Precautions
1-1-1. Do not expose the WF-5100 series inverter to rain,snow,spray,bilge or
dust.To reduce risk of hazard, do not cover or obstruct the
ventilation openings. Do not install the WF- Inverter in a 5100 series
zero-clearance compartment. Overheating may result.
1-1-2. To avoid a risk of fire and electric shock.Make sure that existing
wiring is in good electrical condition; and that wire size is not
under sized.Do not operate the WF- inverter with 5100 series
damaged or substandard wiring.
1-1-3. This equipment contains components which can produce arcs or
sparks.To prevent fire or explosion do not install in compartments
containing batteries or flammable materials or in locations which
require ignition protected equipment.This includes any space
containing generator, fuel tanks, or joints, fittings, or other
connection between components of the fuel system.
1-2. Precautions When Working with Batteries
1-2-1. If battery acid contacts skin or clothing, wash immediately with soap
and water. If acid enters eye, immediately flood eye with running
cold water for at least 20 minutes and get medical attention
immediately.
1-2-2. Never smoke or allow a spark or flame in vicinity of battery.
1-2-3. Do not drop a metal tool on the battery. The resulting spark or
short-circuit on the battery or other electrical part may cause an
explosion.
1-2-4. Remove personal metal items such as rings, bracelets, necklaces,
and watches when working with a lead-acid battery.
A lead-acid battery produces a short-circuit current high enough to
weld a ring or the like to metal, causing a severe burn.
1
Before you install and use Your WF-5100 series Inverter,
To Next Page
Loading...
Need help?
General
