WFCO WF-8735 - User Manual

Operator’s Manual
Distributed in the U.S.A. and Canada by
ARTERRA DISTRIBUTION
(877) 294-8997
Warranty: warranty@wfcoelectronics.com
Fax (574) 294-8698
www.wfcoelectronics.com
Power PROs Technical Support
(877) 294-8997
WF-8700 Series
WF-8712P | WF-8725P | WF-8735P | WF-8740P
( The Power Center model number is located on the front panel label near the AC breakers)

Summary

Safety Information

General Information

Reverse Battery Protection

Protects converter from battery connected backwards; acts as main connection.

Blown Fuse Indicators on DC Fuse Board

Over-Temperature Protection

Unit shuts down if internal temperature is too high, restarts when cooled.

Electronic Current Limiting

Short-Circuit Protection

Circuit Protection

Operational Features

Three Stage Smart Charging

Explains the three charging modes: Bulk, Absorption, and Float.

Troubleshooting Instructions

Check Converter Output Voltage

Steps to check converter output voltage using a voltmeter, including fuse checks.

Reverse Polarity Fuses

How to check reverse polarity fuses for blown elements and continuity.

Troubleshooting Flow Chart

A visual guide to diagnose issues with the power center.

Installation Instructions

Mounting the Enclosure

Wiring the AC Breakers

Wiring the DC Fuse Board

WFCO WF-8735 Specifications

General

Input Voltage	105-130 VAC
Output Voltage	13.6 VDC
Output Current	35 Amps
Frequency	60 Hz
Output Power	476 Watts
Operating Temperature	0°C to 60°C