WFCO WF-8725P - User Manual

Operator’s Manual
Distributed in the U.S.A. and Canada by
ARTERRA DISTRIBUTION
(877) 294-8997
Warranty: warranty@wfcoelectronics.com
Fax (574) 294-8698
www.wfcoelectronics.com
Power PROs Technical Support
(877) 294-8997
WF-8700 Series
WF-8712P | WF-8725P | WF-8735P | WF-8740P
( The Power Center model number is located on the front panel label near the AC breakers)

Summary

General Information

Reverse Battery Protection

Circuit Protection

Short-Circuit Protection

Operational Features

Three-Stage Smart Charging

Explains Bulk, Absorption, and Float modes for maximizing battery life.

Troubleshooting the WF-8700 Series Power Center

Check Converter Output Voltage

Procedure to verify converter output voltage using a voltmeter.

Reverse Polarity Fuses

Guidance on checking and replacing reverse polarity fuses for DC output issues.

Installation Instructions

Mounting the Enclosure

Instructions for mounting the WF-8700 Series enclosure in an accessible area.

Wiring the AC Breakers

Steps for wiring AC power, main breaker, and branch circuits.

Wiring the DC Fuse Board

Guidance on connecting DC loads to the fuse board and selecting fuse ratings.

Consumer Limited Warranty

Consumer Warranty Claim Procedure

WFCO WF-8725P Specifications

General

Input Voltage	105-130 VAC
Frequency	60 Hz
Output Voltage	13.6 VDC
Output Current	25 A
Operating Temperature	0 to 40 °C