WFCO WF-8740 User Manual

Operator’s Manual
Distributed in the U.S.A. and Canada by
ARTERRA DISTRIBUTION
(877) 294-8997
Warranty: warranty@wfcoelectronics.com
Fax (574) 294-8698
www.wfcoelectronics.com
Power PROs Technical Support
(877) 294-8997
WF-8700 Series
WF-8712P | WF-8725P | WF-8735P | WF-8740P
( The Power Center model number is located on the front panel label near the AC breakers)

WFCO WF-8740 Specifications

General

Brand	WFCO
Model	WF-8740
Category	Power Supply
Language	English

Summary

General Information

Reverse Battery Protection

Protects the converter from a battery connected backwards, preventing permanent damage.

Blown Fuse Indicators on DC Fuse Board

Over-Temperature Protection

The unit shuts down if internal temperature exceeds a critical point and restarts when cooled.

Electronic Current Limiting

Short-Circuit Protection

Converter drops voltage to zero on short-circuit and resumes normal operation when condition is removed.

Circuit Protection

DC Fuses

AC Circuit Breakers

Operational Features

Three-Stage Smart Charging

Explains the three charging modes: Bulk, Absorption, and Float for optimal battery life.

Troubleshooting

Check Converter Output Voltage

Steps to check the converter's output voltage with a voltmeter to confirm proper function.

Reverse Polarity Fuses

Guidance on checking and replacing reverse polarity fuses if no DC output is detected.

Installation Instructions

Mounting the Enclosure

Wiring the AC Breakers

Wiring the DC Fuse Board