To Next PageTo Next Page
Need help?Do you have a question about the WFCO WF-9875 and is the answer not in the manual?
Protects converter from reverse battery connection damage.
Charger uses Absorption, Bulk, and Float modes to manage battery charging based on voltage.
How to check the converter's DC output voltage using a voltmeter.
Guidance on checking and replacing reverse polarity fuses if there is no DC output.
Protects converter from reverse battery connection damage.
Charger uses Absorption, Bulk, and Float modes to manage battery charging based on voltage.
How to check the converter's DC output voltage using a voltmeter.
Guidance on checking and replacing reverse polarity fuses if there is no DC output.
General| Input Voltage | 105-130 VAC |
|---|---|
| Output Voltage | 13.6 VDC |
| Output Current | 75 A |
| Input Frequency | 60 Hz |
| Charging Stages | 3-Stage Charging: Absorption, Bulk, Float |
| Battery Type | Lead-Acid |
| Protection Features | Overload, Overheat, Short Circuit |
