Do you have a question about the WFCO WF-9865 and is the answer not in the manual?
Input Voltage | 105-130 VAC |
---|---|
Output Voltage | 13.6 VDC |
Output Current | 65 Amps |
Input Frequency | 60 Hz |
Efficiency | 85% |
Operating Temperature | 0°C to 40°C |
Protections | Overload, Short Circuit, Reverse Polarity |
Cooling | Fan Cooled |
Covers electrical shock, spark hazards, ventilation, and battery system safety precautions.
Charger uses Absorption, Bulk, and Float modes based on battery voltage and time.
Guide to checking output voltage using a voltmeter, specifying voltage range and connection points.
Steps to check for blown reverse polarity fuses and their purpose.
Instructions for connecting DC wires to the distribution center's fuse board and battery considerations.