(1) When you wind the shing line, you need to give the load of 1.0 kg ~ 1.5 kg.
(2) If any errors come about during your operation, please push the „MODE“ switch
and nish the working and restart it from the beginning..
(3) Indication of the depth of water is set below + - 5%. It is possible to happen more
than little by the emission range or axpansion and contaction.
(4) Display image is just like -E1- of error , it is short of winding line.
So you have to wind the line more than 50 m.
(5) When dispaly image shows -CE- or -SE-, the reel has to be repaired.
You can contact the shop which is purchasing the product.
(6) If display image shows as below during you input the data or complete the input,
there may be the falut in your input method or defect in the reel.
Error in the control box.
- Restart fron the beginning.
Short of line.
- Check the drag position.
Error of spool´s rotation.
- Reset after checking.
10
To Next Page
Loading...
