WRONG
OK
CAUTION - AUTOMATIC LINE-GUIDE !
Please note.
Damage to the line-guide of multi-reels mainly occurs because of following handling mistakes :
- If the line is removed from the line-guide after spooling the line on the reel, or after the line ripped off,
it has to be acted with caution for that the line mounted at the right point again.
Otherwise there is a strong side-load on the line-guide, whereby the whole mechanism will get damaged.
When the line is not synchronized correctly by spool and line-guide,
there will be immediate and inevitable damage on the line-guide when using strong braided low-stretch lines.
This certainly will happen by rst time the line is mounted without precise synchronisation.
Electric operated multi-reels are coercively reliant on a 100% precise synchronisation
due to the high engine torque of the electric drives.
If you do not follow this advice, there unavoidable will be damage to the line-guide.
- Damages, which occure of handling mistakes as described above, are excluded of our warranty !
SAFETY INDICATION
22
To Next Page
Loading...
