To Next PageTo Next PageWhat to do if my Whale Watermaster Water Pump will not run?
If your Whale Water Pump won't run, try these steps: Ensure at least one tap is open. Check the battery condition and make sure the mains and pump isolator switches are on. Verify the plug and socket contacts are clean and making contact, and inspect the wiring connections. Also, check the fuse and try turning the pump isolation switch off and on again.
Why does my Whale Watermaster Water Pump cycle on and off?
If your Whale Water Pump cycles on and off even when all taps and the shower are closed, examine the taps and piping for air or water leaks. Also, check the non-return valve in the socket for grit by pushing a blunt object, like a ballpoint pen, into the socket nipple against the non-return valve to dislodge any trapped grit. If the pump is within its 1-year warranty, contact the retailer to replace the pump.
General| Brand | Whale |
|---|---|
| Model | Watermaster Series |
| Category | Water Pump |
| Language | English |
Describes the intended use of the Exterior Pump Range in recreational vehicles.
Explains how the Whale Watermaster Exterior Pump Range works.
Details the specific uses and compatibility of the pump range.
Crucial safety precautions and limitations for product use.
Lists all components included with the Whale Watermaster pumps.
Information on additional accessories available for the pump system.
Step-by-step guide for connecting the submersible pump to sockets.
Guidelines for storing the pump when not in use.
Routine maintenance procedures for the pump.
Tips for efficient operation and extending pump life.
Solutions for common problems like pump not running or cycling.
Specific instructions or lack thereof for winter protection.
Contact information for technical assistance and spare parts.
Compliance statement regarding EU directives and harmonized standards.
Lists patents and registered trademarks associated with the product.
Details on the product's one-year warranty coverage.
