Whalen SF122B-26A - User Manual

Questions and Answers

C
Christopher LewisAug 10, 2025
What to do if Whalen SF122B-26A Indoor Fireplace remote control is not working?
- C
  christophersanchezAug 10, 2025
  If the remote control for your Whalen Indoor Fireplace isn't working, try these steps: First, replace the remote batteries. Then, operate the remote transmitter at a slow, measured pace, pressing the buttons with an even motion and gentle pressure. Avoid repeatedly pressing buttons in rapid succession, as this may cause the transmitter to malfunction.
B
Brian SandersAug 15, 2025
What to do if my Whalen SF122B-26A heater does not work, but the Power and Heater switches are in the 'ON' position and thermostat is set to 'HI'?
- K
  Kayla OlsonAug 15, 2025
  If your Whalen Indoor Fireplace heater isn't working despite the power and heater switches being on and the thermostat set to high, turn all switches to the 'OFF' position and unplug the unit from the wall outlet for 5 minutes. After 5 minutes, plug the unit back in and operate as normal.
J
Justin HernandezAug 21, 2025
What does it mean when the display unit on my Whalen SF122B-26A control panel shows '88' and the function indicator is quick flashing?
- A
  Alex MooreAug 21, 2025
  If the display unit on your Whalen Indoor Fireplace control panel shows '88' and the function indicator is quick flashing, indicating it is in alarm mode, unplug the unit from the wall outlet for 5 minutes. After 5 minutes, plug it back in and operate as normal.
K
kevin94Aug 26, 2025
Why my Whalen SF122B-26A Indoor Fireplace heater does not blow warm air?
- J
  jonesbreannaAug 26, 2025
  If your Whalen Indoor Fireplace shows a visible flame effect, but the heater doesn't blow warm air, ensure that the temperature setting exceeds the current room temperature. Also, try turning the Heater button on and off several times to ensure it's in the 'ON' position.
D
douglassilvaAug 30, 2025
How to fix Whalen SF122B-26A that does not turn on?
- E
  elizabeth95Aug 30, 2025
  If your Whalen Indoor Fireplace doesn't turn on, first check that it's plugged into a standard 120V outlet. Then, press the Power button on the control panel.
S
Samantha GarciaSep 4, 2025
What to do if my Whalen SF122B-26A power switch lights up, but there is no flame effect?
- L
  Laura SmithSep 4, 2025
  If the main power switch lights up on your Whalen Indoor Fireplace, but there's no flame effect, open the top and back panels to check if the flame spindle has fallen off from the spindle motor.