EasyManua.ls Logo

Wharfedale Pro BX1780SD - General Specifications

Wharfedale Pro BX1780SD
22 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
General specifications:
Maximum output power: BX1060/1360SD: 300W/4Ω 200W/8Ω @0.4% THD at 1KHz
BX1780SD: 400W/4Ω 300W/8Ω @0.4% THD at 1KHz
Frequency response: 20Hz-20KHz +1dB -3dB@1W output into 8Ω(speakers out)
20Hz-30KHz+1dB -3dB@+4dB output into 10KΩ(main out monitor out effect out)
Total harmonic distortion: Less than 0.3%@20Hz-30KHz main out monitor out effect out)
Hum&noise: -58dB residual output noise(speakers out)
-88dB residual output noise(main out, monitor out)
-76dB (main out monitor out) Master level Control: nominal level
Channel level Controls: minimum
-75dB (main out monitor out) Master level Control: nominal level
One channel level control: nominal level
-78dB (effect out) EFX Master Level Control: nominal
One Channel level Control: minimum
-74dB (effect out) EFX master level Control: nominal
One Channel level Control:nominal
Maximum voltage gain: Mic to main and monitor out: 66dB
Mic to effect out: 65dB
Mic to record out: 50dB
Hi-z to main and monitor out: 40dB
Input super hi-z to main monitor out: 40dB
Left/right line to main and monitor out: 20dB
Tape to main and monitor out: 20dB
Crosstalk at 1KHz: 70dB adjacent input
Input channel equalisation: 3 Band EQ 2 Band EQ:
±15dB maximum: High 12kHz shelving High: 10kHz shelving
Mid 2.5kHz shelving
Low 80Hz shelving Low: 100Hz shelving
Meters BX1060SD: 5 points LED meter at main and monitor out
BX1360/1780SD: 7 points LED meter at main and monitor out
Graphic equalizer: BX1060SD: 7 bands main/monitor out ±12dB maximum
BX1360/1780SD: 9 bands main/monitor out ±15dB maximum
Channel Peak LED: Illuminate at 3dB before clipping
Phantom power: +48V(balanced input)
Digital Effect: 8 preset effects: Vocal 1, Vocal 2, Vocal 3, Room 1, Room 2,
Medium Hall, Large Hall, Vocal Delay
Protection circuit Short circuit,
(Power Amp): Power switch on/off mute,
DC detection,
Temp (Heatsink Temp ≥ 90 degrees)
Foot switch: Digital effect mute on/off
EFX bypass: Digital effect on/off
Power consumption: BX1060/1360SD: 1000W BX1780SD: 1300W
Dimensions(WxHxD): 600*390*400mm
Weight: BX1060SD: 17.8kg BX1360SD: 18.2kg BX1780SD: 19.2kg
Supplied accessories: AC power cord & owners manual
PAGE 16