Need help?Do you have a question about the Wharfedale Pro MP 2800 and is the answer not in the manual?
Power| power per channel 8 ohms stereo mode | 260 Watts |
|---|---|
| power per channel 4 ohms stereo mode | 400 Watts |
| power per channel 2 ohms stereo mode | 640 Watts |
| power per channel 8 ohms bridged mono mode | 800 Watts |
| power per channel 4 ohms bridged mono mode | 1280 Watts |
Input Specifications| input sensitivity 4 ohms | 0.775v |
|---|---|
| input impedance unbalanced | 10k Ohms |
| input impedance balanced | 20k Ohms |
Performance| voltage gain | 35dB |
|---|---|
| slew rate | 30v/u sec |
| channel separation | 76dB |
| signal to noise ratio | 100dB |
| distortion | less than 0.05% |
| frequency response | 20Hz to 20kHz |
| extended frequency response | 5Hz to 50kHz |
| damping factor | Greater than 300 |
Weight and Dimensions| gross weight | 23kg / 50.6lbs |
|---|---|
| net weight | 21.5kg / 47.3lbs |
| dimensions (H x W x D) mm | 133 x 483 x 355 |
| dimensions (H x W x D) inches | 5.2 x 19 x 13.9 |
Power| power per channel 8 ohms stereo mode | 600 Watts |
|---|---|
| power per channel 4 ohms stereo mode | 950 Watts |
| power per channel 2 ohms stereo mode | 1450 Watts |
| power per channel 8 ohms bridged mono mode | 1700 Watts |
| power per channel 4 ohms bridged mono mode | 2700 Watts |
Input Specifications| input sensitivity 4 ohms | 0.775v |
|---|---|
| input impedance unbalanced | 10k Ohms |
| input impedance balanced | 20k Ohms |
Performance| voltage gain | 38dB |
|---|---|
| slew rate | 40v/u sec |
| channel separation | 78dB |
| signal to noise ratio | 100dB |
| distortion | less than 0.05% |
| frequency response | 20Hz to 20kHz |
| extended frequency response | 5Hz to 50kHz |
| damping factor | Greater than 400 |
Weight and Dimensions| gross weight | 29.5kg / 65lbs |
|---|---|
| net weight | 28kg / 61.6 lbs |
| dimensions (H x W x D) mm | 133 x 483 x 355 |
| dimensions (H x W x D) inches | 5.2 x 19 x 13.9 |
Power| power per channel 8 ohms stereo mode | 330 Watts |
|---|---|
| power per channel 4 ohms stereo mode | 600 Watts |
| power per channel 2 ohms stereo mode | 900 Watts |
| power per channel 8 ohms bridged mono mode | 1200 Watts |
| power per channel 4 ohms bridged mono mode | 1800 Watts |
Input Specifications| input sensitivity 4 ohms | 0.775v |
|---|---|
| input impedance unbalanced | 10k Ohms |
| input impedance balanced | 20k Ohms |
Performance| voltage gain | 36dB |
|---|---|
| slew rate | 30v/u sec |
| channel separation | 76dB |
| signal to noise ratio | 100dB |
| distortion | less than 0.05% |
| frequency response | 20Hz to 20kHz |
| extended frequency response | 5Hz to 50kHz |
| damping factor | Greater than 300 |
Weight and Dimensions| gross weight | 25kg / 55lbs |
|---|---|
| net weight | 23.5kg / 51.7lbs |
| dimensions (H x W x D) mm | 133 x 483 x 355 |
| dimensions (H x W x D) inches | 5.2 x 19 x 13.9 |
General guidelines for safe operation and maintenance.
Critical warnings regarding usage, earthing, markings, and servicing.
Company history and an overview of the professional MP series amplifiers.
Instructions for unpacking and details on the limited warranty for the amplifiers.
Essential safety checks before use and the intended application of the MP range.
Details the design, rack mounting, and construction of the MP series amplifiers.
Steps to ensure safe operation before switching on the power amplifier.
Explanation of the power switch, indicators, and input attenuators on the front panel.
Details on input connectors, mode switches, cooling, and power inputs on the rear panel.
Information on connecting loudspeakers using binding posts or Speakon connectors.
Details on XLR and Jack inputs, and how to configure for bridged mono operation.
Illustrates various balanced and unbalanced input wiring methods for different connectors.
Details on thermal and output short circuit protection mechanisms.
Detailed power ratings for stereo and bridged modes across different impedances.
Information on input sensitivity, frequency response, and amplifier topology.
Lists all connectors, front/rear controls, indicators, and physical dimensions.
To Next Page
