Need help?Do you have a question about the Wharfedale Pro S-1000 and is the answer not in the manual?
General| Type | Power Amplifier |
|---|---|
| THD | <0.03% |
| Input Impedance (Balanced) | 20 kOhms |
| Input Impedance (Unbalanced) | 10 kOhms |
| Input Sensitivity | 0.775V (0dBu) |
| Signal to Noise Ratio | >100dB |
| Cooling | Dual Speed Fan |
| Dimensions | 483 x 88 x 366 mm |
| Weight | 13.5 kg |
| Power Output | 2 x 500W RMS @ 4 Ohms |
| Power Output (4 Ohms) | 2 x 500W RMS @ 4 Ohms |
| Frequency Response | 20Hz - 20kHz |
| Input Impedance | 20k Ohms |
| Protection | Short Circuit, Thermal |
| Connectors Input | XLR, Jack |
| Connectors Output | Speakon |
Visual diagrams of front and rear panel components.
Detailed description of front panel components and their functions.
Detailed description of rear panel connectors and their functions.
Overview of mode switches for inputs and outputs.
Explanation of Limiter, Lo Cut, Input, and Bridge modes.
Wiring options using NL-4 and binding posts.
Wiring for dual and bridged-mono NL-4 connectors.
Methods for connecting speaker cables via binding posts.
Wiring with spade lugs and banana plugs.
Specifics for connecting speaker cable in bridged-mono.
Recommended procedures for system setup and operation.
Detailed technical specifications for the S-1000 model.
Detailed technical specifications for the S-1500 model.
Detailed technical specifications for the S-2500 model.
Contact address and company information.
Official website and copyright information.
To Next Page
