G
Gary JohnsonSep 13, 2025
What to do if INP1 and INP2 LEDs do not light in ALARM on Wheelock Power Supply?
To Next PageTo Next PageWhat to do if INP1 and INP2 LEDs do not light in ALARM on Wheelock Power Supply?
General| Brand | Wheelock |
|---|---|
| Model | POWERPATH PS-12-24-8 |
| Category | Power Supply |
| Language | English |
Explains the PS-12/24-8 POWERPATH's function for fire alarm systems and its capabilities.
Details the product's approvals, inputs, outputs, supervision capabilities, and features.
Defines key terms like Class "A", Class "B", FACP, EOLR, NAC, etc., used in the manual.
Identifies and describes the function of each terminal on the POWERPATH unit.
Explains LED indicators and provides battery maintenance guidance.
Guides on unpacking, inspecting for damage, and mounting the POWERPATH unit safely.
Details the step-by-step process for wiring the POWERPATH unit, including DIP switch settings.
Explains how to connect relay status signals for AC FAIL and BAT FAIL conditions.
Describes the four available output modes: Normal, Temporal, IN>OUT SYNC, and Wheelock SYNC.
Explains how to set the DIP switches for various operational modes and input selections.
Details how to configure and wire Class "B" output circuits for different operational modes.
Details how to configure and wire Class "A" output circuits for different operational modes.
Illustrates synchronizing multiple PS-12/24-8 units using a master and remote configuration.
Provides a table of common problems, their causes, and recommended actions for the POWERPATH.
Lists appliances produced by Wheelock compatible with the PS-12/24-8 POWERPATH.
Outlines the limited warranty terms, conditions, and limitations for Wheelock products.
